Intel node rename – not pulling a fast one

Intel held a candid roadmap discussion on Monday, outlining its product plans for the next five years starting with the renaming of its transistor nodes.

In its new nomenclature, Intel will no longer use nanometre (nm) to denote different node generations. Starting with its enhanced 10nm SuperFin FinFET, Intel will mark node advancement with a number. Its enhanced 10nm node will just be called Intel 7. After that, its 7nm will be renamed to Intel 5 and its refinement, 7nm+, to Intel 3.

Intel's new roadmap and rename.
Intel’s new roadmap and rename. Source: Intel

After 4, Intel will enter what it calls the angstrom era. The first generation angstrom node will be called Intel A20, followed by A18 in 2025. The move into angstrom will also introduce Intel’s first gate-all-around transistor called RibbonFET.

The node rename is to help shift the perception that Intel’s transistors are “larger” than its competitors. While nanometre once defined the actual size of the transistors in the semiconductor industry, its definition has evolved from a unit of measurement to simply indicate a generational leap, a development that seemed most prominent when the industry introduced 3D FinFETs.

The big rename and expected features

Old name New name Expected update
10nm Enhanced SuperFin Intel 7 10 to 15 per cent performance-per-watt gain over current Intel 10nm SuperFin through transistor optimizations, including increased strain, more low-resistance materials, novel high-density patterning techniques, streamlined structures and better routing with a higher metal stack. Arriving in Alder Lake for clients in 2021 and Sapphire Rapids for servers in Q1 2022.
Intel 7nm FinFET Intel 4 20 per cent performance-per-watt over Intel 7. First to use extreme ultraviolet lithography (EUV) developed in partnership with ASML. Ready for production in H2 2022, shipping in products in 2023. First arriving in Meteor Lake for clients and Granite Rapids for servers.
Intel 7nm+ FinFET Intel 3 18 per cent performance-per-watt over intel 4. Denser performance library, increased drive current, optimized interconnect metal stack, and increased use of EUV compared to Intel 4. Begins manufacturing products in H2 2023.
5nm Intel 20A Angstrom era. Introduces PowerVia and gate-all-around transistor (RibbonFET). Ramp in 2024.

 

If FinFETs have made the nanometres label nearly irrelevant, it will become even less so when the industry adopts the gate-all-around (GAA) transistor design. TSMC will switch to GAA with its 2nm node in 2023, while Samsung will begin theirs at 3nm in 2022.

Intel RibbonFET wraps the channel around the gate, achieving higher performance while shrinking the size versus FinFET. Source: Intel

There’s a good reason why the industry stuck with the archaic naming scheme: marketing. Typically, shrinking the transistor increases power efficiency and density. Power efficiency is a no-brainer; if the transistor can offer the same or better performance for less energy, it’s easier to build more power-efficient chips. Higher density provides similar benefits. Being able to pack more transistors in the same or smaller area allows for more functions and increases performance. Therefore, smaller transistors have become almost synonymous with cutting edge–and it certainly looks good in marketing materials.

But nanometre has long since lost its meaning, partly because each manufacturer has different methods of measurement, and partly because transistor quality is determined by more than just a single number. Beyond the transistors themselves, the contacts, channel, metal stack and other components all play a part in the overall performance. 

To confuse matters further, manufacturers sometimes designate a new number for an optimized version of the same node. For example, TSMC’s 12nm was actually a refined version of its 16nm node.

Thus, it’s a mistake to directly compare transistor sizes between different manufacturers. For example, it’s incorrect to assume that TSMC’s 7nm transistors are 30 per cent smaller than Intel’s 10nm.

Peak transistor density from different manufacturers.
Intel’s 10nm is relatively comparable in peak density to TSMC’s 7nm node. Source: Wikichip via AnandTech. Source: AnandTech

Intel is currently preparing its fabs in Oregon, Ireland, Arizona and Israel for these new manufacturing processes.

Would you recommend this article?

Share

Thanks for taking the time to let us know what you think of this article!
We'd love to hear your opinion about this or any other story you read in our publication.


Jim Love, Chief Content Officer, IT World Canada

Featured Download

Tom Li
Tom Li
Telecommunication and consumer hardware are Tom's main beats at IT World Canada. He loves to talk about Canada's network infrastructure, semiconductor products, and of course, anything hot and new in the consumer technology space. You'll also occasionally see his name appended to articles on cloud, security, and SaaS-related news. If you're ever up for a lengthy discussion about the nuances of each of the above sectors or have an upcoming product that people will love, feel free to drop him a line at tli@itwc.ca.

Featured Articles

Cybersecurity in 2024: Priorities and challenges for Canadian organizations 

By Derek Manky As predictions for 2024 point to the continued expansion...

Survey shows generative AI is a top priority for Canadian corporate leaders.

Leaders are devoting significant budget to generative AI for 2024 Canadian corporate...

Related Tech News

Tech Jobs

Our experienced team of journalists and bloggers bring you engaging in-depth interviews, videos and content targeted to IT professionals and line-of-business executives.

Tech Companies Hiring Right Now